電量記錄分析儀是針對電力系統應用而開發的瞬態信號記錄儀器，儀器內部軟件預置了針對發電機調試的試驗模板，使用戶可以通過記錄儀很方便的完成發電機三相短路特性曲線，空載特性曲線，甩負荷試驗，自準同期校核試驗，勵磁系統擾動試驗，勵磁系統頻率電壓特性試驗，勵磁系統滅磁時間常數測量，發電機進相試驗，發電機轉子交流阻抗試驗，功率分析試驗，勵磁系統PSS試驗，電機啟動試驗，變壓器沖擊試驗，電力系統故障查找等過程記錄。
    儀器具有豐富的軟件組件使用戶可以通過軟件組件，進行圖形分析，組合運算，有效值計算，交流功率計算，三相對稱性分析，頻譜分析，諧波分析，曲線相關性分析，圖形編輯和相量圖繪制等操作。試驗數據和分析結果可以生成WORD/EXCEL形式試驗報告，也可以通過軟件生成JPG圖片導出，以方便用戶對試驗結果進行深入的分析和處理。
    儀器具有12路模擬量輸入，12路有源開關量輸入和3路開出量信號，最高采樣頻率可達100KHZ，基本可以滿足電力系統各種試驗的瞬態信號記錄要求。并且所有的模擬通道之間均相互隔離，以避免試驗中不同電位點的連接問題導致被測系統發生故障。

 Power data logger is designed for power signal record. The power generator test items are integrated at the tester. With those test items users can make motor (Power generator) No-load test, Short circuit test, Motor excitation step response test, motor excitatory de-excitation test, motor load rejection test and grid synchronous connection test and also on
       The software components can applied to make curve analysis, math calculation, RMS calculation, power analysis, three phase sequence analysis, frequency spectrum analysis, harmonic analysis, curve correlation analysis, picture edit and vector sequence analysis and so on. All the test data and curve can be converted to be WORD/EXCEL test report document. The entire curve in the scope of tester can be converted to be JPG file and saved to PC for further report making.
       There are 12 channels analog signal input, 12 binary signal input and three relay contact output in the tester. The maximum sample rate of the tester is 100Khz. It can finish almost all the data record tasks for normal power system test. All the input channels are isolated from each others, so that all the different circuit connected to the tester will not affect each other.（英文版的產品我們已經為中能建提供）

 歡迎來到咨詢，武漢華能聯創電氣有限公司智能電量記錄分析儀，可定制相關數據采集模塊。同時我公司也推出多款型號產品：24通道高速數據采集系統、水輪機調速器仿真測試儀、熱工信號分析儀、水電機組動態信號分析儀等